GeoHazardMonitor/business-service/src/main/resources/mapper/service/BaseCameraManagementMapper.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE mapper PUBLIC "-//mybatis.org//DTD Mapper 3.0//EN" "http://mybatis.org/dtd/mybatis-3-mapper.dtd">
<mapper namespace="com.ozs.service.mapper.BaseCameraManagementMapper">


    <select id="selectCameraManagementList" resultType="com.ozs.service.entity.BaseCameraManagement" parameterType="com.ozs.service.entity.vo.BaseCameraManagementVo">
        SELECT
        a.id  AS id,
        a.camera_code AS cameraCode,
        a.railway_code AS railwayCode,
        a.channel AS channel,
        a.dept_id AS deptId,
        a.line_dir AS lineDir,
        a.install_mile AS installMile,
        a.begin_mile AS beginMile,
        a.end_mile AS endMile,
        a.install_longitude AS installLongitude,
        a.install_latitude AS installLatitude,
        a.card_num AS cardNum,
        a.start_recording AS startRecording,
        a.task_id AS taskId,
        a.create_time AS createTime,
        a.remark AS remark,
        a.version_id AS versionId,
        a.version_num AS versionNum,
        a.version_name AS versionName,
        a.last_version_num AS lastVersionNum,
        a.measure_point_name AS measurePointName,
        a.camera_sn AS cameraSn,
        r.railway_type AS railwayType,
        man.is_disable AS isDisable
        FROM
        base_camera_management a join base_railway_management r
        on a.railway_code=r.railway_code
        LEFT JOIN base_device_dynamic_management AS man ON a.camera_code = man.camera_code
        <where>
            <if test="railwayCode != null and railwayCode != ''">
                and a.railway_code=#{railwayCode}
            </if>
            <if test="isDisable != null and isDisable != 0">
                and man.is_disable=#{isDisable}
            </if>
            <if test="cameraCode != null and cameraCode != ''">
                and a.camera_code like concat('%', #{cameraCode}, '%')
            </if>
            <if test="lineDir != null and lineDir != 0">
                and a.line_dir =#{lineDir}
            </if>
            <if test="deptId != null and deptId != 0">
                and a.dept_id =#{deptId}
            </if>
            <if test="beginMile != null and beginMile != 0">
                and a.install_mile &gt;=#{beginMile}
            </if>
            <if test="endMile != null and endMile != 0">
                and a.install_mile &lt;=#{endMile}
            </if>
            <if test="installMile != null and installMile != 0">
                and a.install_mile =#{installMile}
            </if>
            <if test="railwayType != null and railwayType != 0">
                and r.railway_type =#{railwayType}
            </if>
            <if test="ids != null and ids.size>0">
                and a.id in
                <foreach item="items" collection="ids" separator="," open="(" close=")" index="">
                    #{items}
                </foreach>
            </if>
            <if test="!dsFlay">
                and
                <trim prefix="(" prefixOverrides="or" suffix=")">
                <if test="dsUserId != null and dsUserId != ''">
                    or a.create_by=#{dsUserId}
                </if>
                <if test="dsDeptId != null and dsDeptId != 0">
                    or a.dept_id=#{dsDeptId}
                </if>
                <if test="dsDeptIds != null">
                    or a.dept_id in
                    <foreach item="item" collection="dsDeptIds" separator="," open="(" close=")" index="">
                        #{item}
                    </foreach>
                </if>
                </trim>
            </if>
        </where>
        ORDER BY
        CONVERT (r.railway_name USING gbk),a.install_mile
    </select>

    <select id="countCamera" parameterType="com.ozs.service.entity.vo.MsgAlarmVo" resultType="java.lang.Integer">
        select count(id) from base_camera_management
        <where>
            <if test="!dsFlay">
                and
                <trim prefix="(" prefixOverrides="or" suffix=")">
                    <if test="dsUserId != null and dsUserId != ''">
                        or create_by = #{dsUserId}
                    </if>
                    <if test="dsDeptId != null and dsDeptId != 0">
                        or dept_id = #{dsDeptId}
                    </if>
                    <if test="dsDeptIds != null">
                        or dept_id in
                        <foreach item="item" collection="dsDeptIds" separator="," open="(" close=")" index="">
                            #{item}
                        </foreach>
                    </if>
                </trim>
            </if>
        </where>
    </select>


    <select id="getCameraChannelByAlarmId" resultType="java.util.Map">
        select b.channel,
               b.camera_code    as cameraCode,
               ma.is_lock       as isLock,
               ma.released_time as releasedTime,
               ma.alarm_time    as alarmTime
        from msg_alarm ma
                 left join
             base_camera_management b on ma.camera_code = b.camera_code
        where ma.alarm_id = #{alarmId}
    </select>
    <select id="deviceStatePage" resultType="com.ozs.service.entity.vo.DeviceStateResp" parameterType="com.ozs.service.entity.vo.DeviceStateResp">
        SELECT
        ca.install_mile AS installMile,
        ca.measure_point_name AS measurePointName,
        ra.railway_name AS railwayName,
        ra.railway_type AS railwayType,
        de.dept_name AS deptName,
        CASE
        line_dir
        WHEN 1 THEN
        '上行'
        WHEN 2 THEN
        '下行'
        WHEN 3 THEN
        '上下行'
        END AS lineDir,
        CASE
        man.is_disable
        WHEN 1 THEN
        '正常'
        WHEN 2 THEN
        '故障'
        END AS isDisable,
        man.electricity,
        ca.camera_code AS cameraCode,
        ca.camera_sn AS cameraSn,
        man.update_time AS updateTime
        FROM
        base_camera_management AS ca
        LEFT JOIN base_railway_management AS ra ON ca.railway_code = ra.railway_code
        LEFT JOIN sys_dept AS de ON ca.dept_id = de.dept_id
        LEFT JOIN base_device_dynamic_management AS man ON ca.camera_code = man.camera_code
        <where>
            <if test="railwayCode != null and railwayCode != ''">
                and ca.railway_code=#{railwayCode}
            </if>
            <if test="isDisable != null and isDisable != ''">
                and man.is_disable=#{isDisable}
            </if>
            <if test="electricity != null and electricity != ''">
                and man.electricity &lt;=#{electricity}
            </if>
            <if test="lineDir != null and lineDir != 0">
                and ca.line_dir =#{lineDir}
            </if>
            <if test="railwayType != null and railwayType != 0">
                and ra.railway_type =#{railwayType}
            </if>
            <if test="deptId != null and deptId != 0">
                and ca.dept_id =#{deptId}
            </if>
            <if test="!dsFlay">
                and
                <trim prefix="(" prefixOverrides="or" suffix=")">
                    <if test="dsUserId != null and dsUserId != ''">
                        or ca.create_by=#{dsUserId}
                    </if>
                    <if test="dsDeptId != null and dsDeptId != 0">
                        or ca.dept_id=#{dsDeptId}
                    </if>
                    <if test="dsDeptIds != null">
                        or ca.dept_id in
                        <foreach item="item" collection="dsDeptIds" separator="," open="(" close=")" index="">
                            #{item}
                        </foreach>
                    </if>
                </trim>
            </if>
        </where>
        ORDER BY man.is_disable DESC,
        man.update_time DESC
    </select>
    <select id="alarmCountSort" resultType="com.ozs.service.entity.vo.AlarmCountSortVo">
        SELECT COUNT(m.camera_code) AS cameraCount,c.camera_code AS cameraCode,c.measure_point_name AS measurePointName
        FROM msg_alarm  m JOIN base_camera_management  c ON m.camera_code=c.camera_code
        <where>
            <if test="ids != null and ids.size>0">
                and c.id in
                <foreach item="items" collection="ids" separator="," open="(" close=")" index="">
                    #{items}
                </foreach>
            </if>
            <if test="!dsFlay">
                and
                <trim prefix="(" prefixOverrides="or" suffix=")">
                    <if test="dsUserId != null and dsUserId != ''">
                        or c.create_by=#{dsUserId}
                    </if>
                    <if test="dsDeptId != null and dsDeptId != 0">
                        or c.dept_id=#{dsDeptId}
                    </if>
                    <if test="dsDeptIds != null">
                        or c.dept_id in
                        <foreach item="item" collection="dsDeptIds" separator="," open="(" close=")" index="">
                            #{item}
                        </foreach>
                    </if>
                </trim>
            </if>
        </where>
        GROUP BY m.camera_code
        ORDER BY cameraCount DESC
    </select>
</mapper>